• home icon
  • arrow icon Products
  • arrow iconSatellite Receiver (15-88-2000)

Satellite Receiver

15-88-2000

The Salcom Satellite Receiver creates the ability to implement messaging networks independent of a terrestrial data carrier by utilising digital satellite TV providers to deliver messaging data to remote transmitters not covered by existing networks.

Messages are sent from the Salcom Message servers via the Free View satellite television
service (DVB-S) to the receiver. Messages are output in a standard messaging protocol for connection to a paging transmitter.

The Salcom Satellite Receiver creates the ability to implement messaging networks independent of a terrestrial data carrier by utilising digital satellite TV providers to deliver messaging data to remote transmitters not covered by existing networks.

Messages are sent from the Salcom Message servers via the Free View satellite television
service (DVB-S) to the receiver. Messages are output in a standard messaging protocol for connection to a paging transmitter.

  • Operates over existing DVB-S network (AUS/NZ Only)
  • Can be migrated onto other satellite networks.
  • Self-resets on data loss event.
  • Can be deployed in areas not covered by terrestrial data networks.
  • Uses standard DVB-S dishes and LNB’s (Freeview or SKY).
  • Fast message delivery time through network (typically 8 – 10 seconds)
Technical Specifications
Satellite band Ku
LNB Frequency 15 options; 5750 to 11300MHz
Satellite Profiles Factory set to one; Profiles can be added as required
TP Profiles Factory set to one; Profiles can be added as required
Polarity Horizontal or Vertical
Output Protocol VisiCAD, TNPPb, or RAW data
Serial Data Rate 9600, N, 8, 1
Power Supply 13.5V typical (11-15VDC range)
Power Consumption Decoder only: 330mA typical
With LNB: 500mA typical (Horizontal polarity)
Connectors Power: 2-way pluggable terminal block (5.08mm pitch)
Serial: DB9-F
LNB: F-61 socket
HDMI: Standard A connector, 1080i
Configuration IR remote receiver inside the rear panel
Low Battery detection 10.8V, front panel indication
Data integrity detction Requires Heartbeat signal from message server
Auto reset Every five minutes if no heartbeat is received from the server
Over-satellite encryption Yes
Enviromental Protection Not suitable for unprotected outdoor use. Should be protected from adverse environmental conditions. Adequate airflow must be provided for cooling.
Indicators Data integrity, Low battery, Comms, Power/Status
Enclosure Material Extruded aluminium
Existing Data Services Salcom provided via Optus D2 (AUS/NZ only)
Data Connection SNPP or ADHOC via Salcom SMR servers
Weight 940g
Dimensions 225mm x 165mm x 58mm (D x W x H)
Product Brochure
  • Information

    The Salcom Satellite Receiver creates the ability to implement messaging networks independent of a terrestrial data carrier by utilising digital satellite TV providers to deliver messaging data to remote transmitters not covered by existing networks.

    Messages are sent from the Salcom Message servers via the Free View satellite television
    service (DVB-S) to the receiver. Messages are output in a standard messaging protocol for connection to a paging transmitter.

  • Details
    • Operates over existing DVB-S network (AUS/NZ Only)
    • Can be migrated onto other satellite networks.
    • Self-resets on data loss event.
    • Can be deployed in areas not covered by terrestrial data networks.
    • Uses standard DVB-S dishes and LNB’s (Freeview or SKY).
    • Fast message delivery time through network (typically 8 – 10 seconds)
  • Specifications
    Technical Specifications
    Satellite band Ku
    LNB Frequency 15 options; 5750 to 11300MHz
    Satellite Profiles Factory set to one; Profiles can be added as required
    TP Profiles Factory set to one; Profiles can be added as required
    Polarity Horizontal or Vertical
    Output Protocol VisiCAD, TNPPb, or RAW data
    Serial Data Rate 9600, N, 8, 1
    Power Supply 13.5V typical (11-15VDC range)
    Power Consumption Decoder only: 330mA typical
    With LNB: 500mA typical (Horizontal polarity)
    Connectors Power: 2-way pluggable terminal block (5.08mm pitch)
    Serial: DB9-F
    LNB: F-61 socket
    HDMI: Standard A connector, 1080i
    Configuration IR remote receiver inside the rear panel
    Low Battery detection 10.8V, front panel indication
    Data integrity detction Requires Heartbeat signal from message server
    Auto reset Every five minutes if no heartbeat is received from the server
    Over-satellite encryption Yes
    Enviromental Protection Not suitable for unprotected outdoor use. Should be protected from adverse environmental conditions. Adequate airflow must be provided for cooling.
    Indicators Data integrity, Low battery, Comms, Power/Status
    Enclosure Material Extruded aluminium
    Existing Data Services Salcom provided via Optus D2 (AUS/NZ only)
    Data Connection SNPP or ADHOC via Salcom SMR servers
    Weight 940g
    Dimensions 225mm x 165mm x 58mm (D x W x H)
  • Manuals & Downloads
    Product Brochure
" class="hidden">红袖添香全本小说